Nylon 66 Materials Temperature Resistant Red Color φ12 Mould
Parting Locks for plastic Injection
Description
The nylon parting lock is part of the friction between the mold and
the nylon sleeve by locking the tapered bolt. It is made up of
nylon sleeve and alloy steel bolt. The color of nylon sleeve is
white, yellow, red and blue.
The mold lock enables the mold to be easily dismantled. During the
processing, the friction between the mold and the resin is adjusted
by tilting the screw, and the mold can be closed about 50000 times
by turning 1/4 circle.
The color and performance of parting locks are as follows:
| white | Neutral | red | Temperature resistance |
| yellow | Wear-resisting | blue | High temperature resistance |
Mounting method
1. Insert the resin sleeve into the movable side of the template
approximately 3 mm.
2. Create a hole in the fixed side of the template and complete it
to reduce the internal surface roughness.
3. To maintain the durability of the mold parting lock, perform R
chamfering on the entrance edge instead of C chamfering.
4. PLBS bushings specifically designed for use with this split lock
help to replace the R chamfer and surface finish process. The taper
bolt of this mold opening controller can be tightened or loosened
to adjust the tension.
Quick Details
The materials of the cone bolt is alloy steel, has excellent
tensile strength and fatigue resistance, and the screw thread
adopts international standards. The nylon sleeves are produced by
PA66 and special additives, different colors have the different
characteristics.
| materials of bolt | alloy steel | Color | Red |
| materials of sleeve | Nylon-66 | Size | φ12 |
Attention
1. The sleeve of parting locks are used special nylon material, has
good wear resistance and heat resistance, although the nylon sleeve
heat resistance temperature is 150, but in the actual use process,
because of the continuous effect of the locking stress of conical
bolts, durability of the nylon sleeve will be reduced, so it
general used below 80℃.
2. Do NOT add lubricating oil on nylon sleeve.
Standard Size
| Size D | H/mm | L/mm | N/mm | M/mm |
| φ12 | 19 | 36 | 11 | 6 |
| φ16 | 24 | 41 | 13 | 8 |
Packing and Shipping
The parting locks are packaged with plastic boxes or PE bags as the
pictrue show, and customized package is welcome.
About the shipping, all the well-known express companies and ocean
shipping can be selected, but in remote areas, we can only use EMS.
