2 Flutes Corner Radius End Mill Cutter CNC Cutting Tools for Cast
Iron and Ordinary Steel
Description
The cemented carbide / hard alloy / kentanium is mainly sintered with tungsten carbide powder, cobalt
as a binder. With the increase of cobalt content, the toughness of
the material increases, but the hardness decreases. By adjusting
the content of cobalt, tool materials suitable for different
environments can be obtained. It is widely used in high-speed
cutting tools with good rigidity and simple edge shape. With the
development of technology, complex cutting tools are gradually
expanding their applications.
When the material to be cut is relatively soft, such as copper and
plastic, high-speed steel is selected as the material of the tool
to reduce the cost.
Quick Details
According to the bottom surface,cutting tools are divided into
Square-end cutters, ball nose end cutters, Corner radius-end cutters. The Square-end cutters are used for machining flat parts,Corner
raduis end cutters are used for chamfered products, and the
ball-end cutters are used for machining 3D curved surfaces of
products.
| materials | high speed steel | tapy | Corner Radius End |
| treatment | TiN PVD coating | Flutes | 2 Flutes |
| tolerance | 0.001mm | ODM / OEM | welcome |
| Suitable material for cutting | Ordinary steel | Prehardened steel | stainless
steel | cast
iron | Alumium alloy | Cooper Alloy |
| HRC~39 | HRC~39 | HRC~35 |
| best | Best | good | Best | good | good |
Size
The following Size cutter was in stock, can be sent in 3 work days
after payment. If it will be customized, plz tell us the values of
following pictrue show or sent a drawing to us, angthing else, we
will do it for you.
| D/mm | d/mm | R can be chosen | l/mm | Neck tilt angle | L/mm |
| 6 | 8 | 0.5 | 1 | | | 8 | 15° | 60 |
| 8 | 10 | 0.5 | 1 | | | 10 | 15° | 60 |
| 10 | 10 | 0.5 | 1 | 3 | | 10 | / | 70 |
| 12 | 12 | 0.5 | 1 | 3 | | 12 | / | 80 |
| 16 | 16 | | 1 | 3 | | 16 | / | 95 |
| 20 | 20 | | 1 | 3 | | 20 | / | 110 |
| 25 | 25 | | | 3 | 5 | 25 | / | 120 |
Treatment
Physical Vapor Deposition (PVD) is an advanced surface treatment
technology widely used in the world. Its working principle is that
the gas or evaporated substance is partially ionized by gas
discharge in vacuum, and the evaporation or its reactants are
deposited on the substrate while the gas ions or the evaporated
substance ions are bombarded.
A cutter tool treat by PVD, the friction coefficient is obviously
reduced, which greatly improves the temperature resistance and
service life of the cutter.
Advantage
1, Ideal for cutting from quenched and tempered steel (~45HRC) to
high hardness steel (~65HRC) workpiece materials.
2, The XCP coating with high coating hardness and excellent heat
resistance can provide superior performance even at high speed
cutting.
3, Using original chip flutes, the depth of groove cutting can be
comparable to that of the 2-blade type.
4, The edge of the blade is processed through the arc angle to
minimize the edge of the blade.
5,Multidimensional scanning equipment for quality control
Every product we produce is scanned by multi-dimensional
instruments, and no defective product is allowed to appear in front
of customers.
Packing and Shipping
Our products are packaged with plastic shell to protect the edges
of cutters.
About the shipping, all the well-known express companies and ocean
shipping can be selected, but in remote areas, we can only use EMS.
